Industrial grease users often complain that the lubricant they buy 'melts like water' and leaks out of the bearing housing after just a few hours of operation. This phenomenon is usually caused by a lack of understanding regarding the Dropping Point of the grease thickener.
What is Dropping Point?
The Dropping Point is the temperature at which a grease sample changes from a semi-solid to a liquid state and begins to drip through a standard orifice in laboratory testing (ASTM D566 or D2265). Simply put, this is the upper limit of your grease's structural integrity. If machine temperature exceeds this point, the lubricant no longer functions as a protector and will flow away.
Operational Temperature Limits vs. Dropping Point
It is important to note that you should NOT operate machinery exactly at the Dropping Point temperature. Operating grease at its melting point will cause instant oxidation. The basic technical rule is:
- For simple soap thickeners (Lithium/Calcium): The safe temperature limit is 40°C below the Dropping Point.
- For complex thickeners (Lithium Complex / THETA 107 HT): The safe temperature limit can reach 15% below the Dropping Point.
General Dropping Point Reference Table
| Thickener Type | Typical Dropping Point | Maximum Safe Temperature Limit |
|---|---|---|
| Calcium Soap (Economy Grease) | 90°C - 100°C | 60°C (Light chassis only) |
| Lithium Soap (Multi-Purpose) | 180°C - 195°C | 120°C - 130°C |
| Lithium Complex (High Temp) | 260°C - 300°C+ | 180°C - 220°C (Thickener remains stable) |
| Polyurea (High Speed) | 240°C - 270°C | 160°C - 180°C |
Why THETA 107 HT is the Solution?
The THETA 107 HT (High Temperature) product line uses Lithium Complex technology which has a dropping point above 280°C. This provides a wide 'safety margin' for heavy industrial machines operating continuously at temperatures of 150°C - 180°C, ensuring the grease remains inside the bearing and does not drip out.