Every second, excavator digging teeth collide with solid andesite and jagged mineral stones. Every hour, steel iron shredding auger plates crush thick mud flakes with relentless friction abrasion. Your heavy equipment metal will inevitably wear out.
Buying genuine new spare parts is a capital-intensive option. Engineers cut those budgets by over 70% using the metallurgical science of "Hard Surfacing / Hard Facing" by recoating worn plates with a protective mutant structure.
Basic Concept of Hard Facing
Hard Facing is the process of depositing specialized extreme hardness metal / dense additional alloy layers onto the surface of base metal machine plates using arc welding (SMAW / TIG). The result is cheap steel coated with a robust pearl shield of thick Chromium Carbide that is dozens of times more abrasion-resistant than the base model.
Hardness Scale: Rockwell (HRC)
How brutal is our electrode shield? The Rockwell pressure test scale is used as a reference.
- Typical industrial soft plate steel has an average HRC hardness ranging from 20 to 30.
- Standard Hard Facing Electrode wires produce protective layered weld deposits with a Rockwell (HRC) hardness of about 55 to 62 HRC (Atomic crushing resistance that rivals pure steel lathe carbide drill bits!).
Recommended Execution Patterning
You do not need to coat every square inch of your excavator bucket. This is expensive. Arranging Welding Bead Patterns is mandatory.
| Post-Hard-Face Weld Bead Path Pattern | Best Use Cases |
|---|---|
| Waffle (Crosshatch pattern) | Designed so that crushed sand or soil is actually caught and "locked" into the cubicle cavities of the weld waffle. Turning soil fractures into the protective shield of residual earth! Perfect for sandy clay Bucket Loaders. |
| Dot / Stringer Bead | To avoid plates becoming blistered and warped due to being hit by extreme welding temperatures. Spot brazing techniques break shrinkage tension. |
| Cross-Hatch Rib (Parallel Ribs) | When coarse mineral rocks flow against metal conveyor walls. Sand sweeps past ribs instead of sliding, resisting horizontal abrasive friction wear. |
Recommended Protection Electrode Products
Of course, not just any weld can be used. Do not use standard cheap E6013. ZIETA 60 and 60 HCR / 60W shields are specifically designed with Chromium Carbide block cores against impact with absolute HRC 60 Rockwell levels. ZIETA Hard Facing guarantees your palm oil crushing mill / crusher roll bucket lifespan lasts manifold longer.